Desiccator Storage Cabinets (Dry Boxes)

 Acrylic Desiccators

  TDI Acrylic Desiccator with Nitro-Save

  • TDI's acrylic desiccators provide high quality and durable construction to meet the requirements for cleanroom and assembly component storage applications.
  • 1/4" acrylic (D), ESD safe static dissipative acrylic (SD)
  • Continuous stainless steel door hinge for maximum door support.
  • Spring loaded latches for air-tight door seals.
  • Recessed closed cell neoprene gasket insures integrity in placement.
  • Removable back plenum wall.

 

Why Choose a TDI Desiccator?

Four Door Acrylic Desiccator with Flowmeter

  8 Door Acrylic Desiccator    10 Door Acrylic Desiccator with Flowmeter & Nitro-Save    12 Door Acrylic Desiccator 

 

TDI's Nitro-Save Humidity Control Monitor for Desiccators  Nitro-Save Humidity Control Monitor

 TDI Desiccator Nitrogen Savings Chart

TDI Nitro-Save® Solid state humidity control monitoring system for desiccators and glove boxes. Capable of Maintaining Relative Humidity Control to <5%RH
  • Accurately Controls Pre-Set Relative Humidity

  • Reduces Nitrogen Consumption up to 90%

An economical, reliable sensor instrument that accurately controls pre-set relative humidity (+/-2%RH) in TDI Desiccators.  Ultra Nitro-Flow compartment flow-throughs allow for a single Nitro-Save® required for multiple compartment desiccators.

~
 Stainless Steel Desiccator Cabinets

 TDI Stainless Steel desiccator

         
3 Stack Stainless Steel Desiccators in Stand

Stainless steel desiccator 2 stack in stand

TDI Reel Feeder Storage Desiccators

   
TDI's Nitro-Save Humidity Control Monitor for Desiccators    Nitro-Save Humidity Control Monitor TDI Desiccator Nitrogen Savings Chart
TDI Nitro-Save® Solid state humidity control monitoring system for desiccators and glove boxes. Capable of Maintaining Relative Humidity Control to <5%RH
  • Accurately Controls Pre-Set Relative Humidity

  • Reduces Nitrogen Consumption up to 90%

An economical, reliable sensor instrument that accurately controls pre-set relative humidity (+/-2%RH) in TDI Desiccators.  Ultra Nitro-Flow compartment flow-throughs allow for a single Nitro-Save® required for multiple compartment desiccators.

   
 Application Specific Desiccator Cabinets

TDI's acrylic desiccator storage cabinets provide the highest quality and most durable construction to meet the requirements for cleanroom and assembly component storage applications.  All TDI acrylic desiccator storage cabinets utilize 1/4" acrylic material which is inherently inert and will not out-gas plasticizers which may contaminate desiccator contents.  
 

TDI Waffle Pack Desiccator Storage Cabinet 

   TDI Wafer Storage Desiccator Cabinet     TDI Tape and Reel Storage Desiccator Cabinet    TDI Bonding Wire Storage Desiccator Cabinet

 

   
TDI's Nitro-Save Humidity Control Monitor for Desiccators   Nitro-Save Humidity Control Monitor TDI Desiccator Nitrogen Savings Chart
TDI Nitro-Save® Solid state humidity control monitoring system for desiccators and glove boxes. Capable of Maintaining Relative Humidity Control to <5%RH
  • Accurately Controls Pre-Set Relative Humidity

  • Reduces Nitrogen Consumption up to 90%

An economical, reliable sensor instrument that accurately controls pre-set relative humidity (+/-2%RH) in TDI Desiccators.  Ultra Nitro-Flow compartment flow-throughs allow for a single Nitro-Save® required for multiple compartment desiccators.

 
 Nitro-Gen® - Laboratory Membrane Nitrogen Generators
TDI's new NITRO-GEN® is a simple, cost-effective membrane nitrogen generator.  Using a specialized polymer fiber membrane technology, the generator separates and collects the nitrogen present in air and exhausts oxygen back into the atmosphere.  Coalescing and carbon filters remove impurities from the feed air and protect membrane fibers.

Clean, dry compressed air flows through two filters and then into the membrane cartridge.  The cartridge contains hundreds of hollow fibers that run along it's length to an outlet.  The oxygen in the air passes more easily through the walls of the hollow fibers than the nitrogen.  The nitrogen flows down the hollow fibers to the outlet, where it is collected and sent to the process.  The oxygen collects inside the cartridge housing and is then exhausted into the atmosphere.

The NITRO-GEN® system features adjustable nitrogen flow (SCFH) capacities based on nitrogen purity requirements (99, 98, 97%).  These nitrogen purity ranges are compatible in providing a clean / dry environment for TDI's Desiccators and Isolation Gloveboxes in most applications.

   Phone: (520) 799-8000 | Email: sales@tdiinternational.com  © Copyright 2000-2013 TDI International, Inc.

   Contact TDI for volume handtool pricing!  Email us at: handtools@tdiinternational.com or call (520) 799-8000 Extension 105

   Need Assistance with Equipment? Email us at: equipment@tdiinternational.com or call (520) 799-8000 Extension 107