TDI ESD Safe Class 0 CDM Compliant Swiss Tweezers

Most Critical ESD Applications <50V ESD Threshold 

As semiconductor and microwave devices have evolved with increasing circuit density [<90nm technology] and decreasing pad size, their ESD sensitivity thresholds are substantially reduced.

Commencing in 1992, TDI pioneered the Static Dissipative Ceramic and Polymer Tweezers for the Disk Drive Industry to meet the critical ESD requirements for their Magneto Resistive [MR] read/rite head circuit assemblies, including "Peak Transient Current Discharge" industry compliance.

TDI continues as the leading supplier to the Disk Drive Industry with periodic new tweezers designs, ESD performance and testing advancements.  These TDI Static Dissipative Tweezers/Tips meet the lowest ESD thresholds in voltage [1 volt] and current [1mamp] required in the latest enhanced MR heads, wafer and assembly processing.

To meet these ESD critical parameters, TDI Class 0 CDM Compliant Static Dissipative Tweezers/Tips provide this same static dissipative performance technology as developed for the disk drive industry.   

 

 "KD" Static Dissipative Ceramic Replaceable Tip Tweezers

  • Surface Resistivity 107-109 Ohms/sq.
  • High Temperature Resistance 1000°C
  • Enhanced Solvent / Acid Resistance 
 TDI Class 0 Compliant Replaceable Tip Tweezers   

 "TD" Static Dissipative Polymer Replaceable Tip Tweezers

  • Surface Resistivity 107-109 Ohms/sq.
  • Temperature Resistance 200-230°C
  • Solvent / Acid Resistant 

 "DK" Static Dissipative PEEK Replaceable Tip Tweezers

  • Surface Resistivity 107-109 Ohms/sq.
  • Temperature Resistance 260-300°C
  • Solvent / Acid Resistance 
 

 RESOURCES: 

   
ESD Class 0 Compliant

Class 0 ESD: A Driver for Change in Assembly ESD Control Programs

Terry L. Welsher and G. Theodore Dangelmayer

The proliferation of electronic devices with very high sensitivity to ESD necessitates a transformation of production ESD control programs.  Electrostatic discharge (ESD) controls for electronics manufacturing ......

 

DA Class 0 Definition for Manufacturing

Dangelmayer Associates, LLC.

CDM, CBE & Class 0 | Class 0 Case Study | EOS Misdiagnoses

The term Class 0 has not been defined for manufacturing applications by any industry standard and that there is a growing need for one......

   Phone: (520) 799-8000 | Email: sales@tdiinternational.com  © Copyright 2000-2013 TDI International, Inc.

   Contact TDI for volume handtool pricing!  Email us at: handtools@tdiinternational.com or call (520) 799-8000 Extension 105

   Need Assistance with Equipment? Email us at: equipment@tdiinternational.com or call (520) 799-8000 Extension 107