TDI Options for Desiccators

Desiccator Cabinet Options

#1 IN CUSTOMER SATISFACTION FOR 25+ YEARS

#HM40 Nitro-Save® Humidity Control Monitor

Accurately Controls Pre-Set Relative Humidity
Reduces Nitrogen Consumption to 90% (20%RH) In Many Applications

TDI's Nitro-Save® Humidity Control Monitor is an economical, reliable sensor instrument that accurately controls pre-set relative humidity (+/-2%RH) in TDI Desiccator Cabinets. Ultra Nitro-Flow compartment flow-throughs allow for a single Nitro-Save® required for multiple compartment cabinets.

Retro-Fit Kits Available for Existing Desiccators!

Humidity Control Monitor Operating Instructions

TDI's Nitro-Save Humidity Control Monitor
Electrical: 120V AC/DC
Power Supply UL Approved
(Most Foreign Plugs Available)

TDI's Nitro-Save® significantly reduces the nitrogen required to maintain pre-set humidity (RH) in desiccator cabinets. The Nitro-Save® includes a solenoid control valve & internal sensor system to regulate nitrogen flow in response to high humidity set point. Accuracy is ±2% at 20-80% RH and ±5% at less than 20%RH. The Nitro-Save® is capable of measuring and displaying humidities in the range: 0-100%RH.

Ultra Nitro-Flow compartment flow-throughs allow for a single Nitro-Save® Humidity Control Monitor required for multiple compartment cabinet.

Shelf Racks	Acrylic Shelves	Stainless Steel Shelves

(2 required per compartment)	1/4" Thick - 25 lb Capacity 3/8" Thick - 40 lb Capacity	Required for grounding 40 lb Capacity

Stainless Steel Plates	Grounding	Plenum Chamber

Provides full conductive grounding in ESD cabinet applications & protects from acrylic surface abrasion.	Grounding wire connects from hinge to hard ground in ESD cabinet applications. All racks, shelves, plates, latches & hinge connect to this common ground.	Purges nitrogen into compartments at an even rate. Features a removable back wall. SD Acrylic Desiccators include an SD acrylic back plenum wall.

Bleeder Valve	Flowmeter	Hygrometer

Auto relieves excess nitrogen. Ultra Nitro-Flow® compartment flow-throughs allow for a single bleeder valve required for multiple compartment cabinet.	Allows control of nitrogen flow. #002A Flowmeter - 1-10CFH #002B Flowmeter - 2-20CFH & #002C Flowmeter - 10-100CFH	Economical cabinet temperature and relative humidity level indicator. Mounted in acrylic ID pocket.

Drawer Slides	Camlocks	ID Pockets

Acrylic or Stainless Steel Drawers Shown with horizontal and vertical stainless steel dividers.	Keyed alike or differently	Door mounted acrylic card holder. (One per door).

Painted Steel Stand	Lockable Casters

Heavy-duty with cross member supports for lifetime durability. Levelers or Casters available.	Recommended for large capacity desiccator cabinets for enhanced mobility.

Desiccator Care & Use | Acrylic Material Datasheet | Static Dissipative Acrylic Datasheet | Reduce Nitrogen Consumption