- All screws should be checked to be sure they have not loosened during shipping. Screws should be snug enough to be secure, but gasketing material should not be completely flattened.
- Verify that all accessories are included, per the description on the purchase orders. Contact TDI Customer Service immediately should there be any discrepancies.
- Please use the following guidelines when preparing your glovebox for use:
- Do not store in direct sunlight.
- If your glovebox is going to sit on a table, be sure the table is sturdy enough to support the glovebox weight.
- Choose a location with easy accessibility so doors will not be hitting other objects.
- Check doors for proper alignment. Doors may require re-alignment as a result of movement during shipping. Re-align doors per the following:
- Loosen hinge screws on door to be adjusted and shift gently up or down until latch is properly aligned.
- Tighten screws gently but securely (power screwdrivers are not recommended).
- Door latches may require periodic adjustments since they can become too loose or too tight to operate.
- Clean your glovebox with a mild soap or detergent and plenty of lukewarm water. Use a clean soft cloth, applying only light pressure. Rinse with clear water and dry by blotting with a soft cloth or chamois. When cleaning gloveboxes with grounding tape on them; avoid wetting the tape.
WARNING! - DO NOT USE WINDOW CLEANING SPRAYS OR SOLVENTS SUCH AS ACETONE, BENZENE,
CARBON TETRACHLORIDE, LACQUER THINNER OR ALCOHOL.
|
