Alignable Ceramic Tip Replacement Procedure | |||
|
High Precision - Switzerland | |||
| 1.) Use a small screwdriver to assemble both tips
loosely. Do not tighten until properly aligned per steps 2 and 3.
2.) Vertical Tip Length Alignment: With new tips on handles, hold tweezer vertically with the tips on a solid surface (Figure 1). Apply gentle downward pressure and firmly tighten the screw on the handle with the two oval holes. 3.) Horizontal Tip Alignment: Close the tweezer and hold the tips between your fingers (Figure 2). Firmly tighten the screw on the handle with one oval and one round hole. |  |
 | |
Fig 1: Vertical Adjustment | |||
|
 | ||
| Fig 2: Horizontal Adjustment | |||
| |||
|
Contact TDI for volume pricing! Email us at: handtools@tdiinternational.com or call (520) 799-8000. Phone: (520) 799-8000 | Email: sales@tdiinternational.com © Copyright 2000-2012 TDI International, Inc. TDI Home | Catalog | Newsletter | Terms | Privacy Policy | Contact Us | Conversion Charts | Site Map | |||
