TDI Exclusive! - Class 0 Replacement Tips Procedure

"TD" Polymer Self Aligning Tip Replacement Procedure
Most Critical ESD Applications < 50V ESD Threshold
Class 0 CDM Compliant

TDI Exclusive! - High Precision - Switzerland

	(1) Use a small Phillips Screwdriver to remove hex screw holding tweezer tip to handle.
	(2) Remove tweezer tips held by the dowel pins into handle.
	(3) Replace with new tweezer tip- inserting tips by dowel pins into handle, re-insert hex screw.

Note: All tweezer tips are designed to align with second tip, fully interchangeable, no match required. One tip only can be replaced where new tweezers/tips require one tip change with full alignment (new tip with existing second tip).

Reference ESD Association: www.esda.org