| TECHNICAL DATA SHEET:
Super Alloy Tweezers Type "NC " |
|
|
General Notes:
- Ni-Cr-Mo Super Alloy (Nickel, Chromium, Molybdenum)
- Excellent Strength from Room Temperature to 800°C
- Six Times Harder Than Anti Magnetic Stainless Steel (SA)
- Resistant to Fatigue, Very High Shape Retention
- Fully Non-Magnetic
- Excellent Corrosion Resistance to Most Chemicals, Salts and Acids
- Typical Applications Include Non-Magnetic Tools for Electronic, Laboratory and Medical Applications in Aggressive Chemical Environments
- "NC" Material Chemical Compatibility Chart
|
|
| MECHANICAL PROPERTIES: |
| State | 50% Cold Reduction | |
| Density | 8.4 g/cm3 | |
| Hardness Rockwell C | 60-64 | Highest Hardness at Tweezer Tip |
| Tensile Strength, Ultimate: | 1500 MPa | |
| Tensile Strength, Yield | 1250 | |
| Elongation, Break | 5% | |
| Modulus of Elasticity | 208GPa | |
| THERMAL PROPERTIES: |
| Coef. of Lin. Therm Expansion: | 12.8 E-6/°C | 25°C - 100°C |
| Coef. of Lin. Therm Expansion: | 13.4 E-6/°C | 25°C - 300°C |
| Specific Heat Capacity: | 0.41 J/(g.K) | |
| Thermal Conductivity | 10 W/(m.K) | |
| Continuous Use Temperature: | 600°C | |
| Max Service Temperature, Air | 980°C | |
| ELECTRICAL PROPERTIES: |
| Resistivity | 1.29E-4 Ohm.cm | | |
|
|
|
|
|
Phone: (520) 799-8000 | Email: sales@tdiinternational.com ©
Copyright 2000-2012 TDI International, Inc.
TDI Home |
Catalog |
Newsletter |
Terms |
Privacy Policy |
Contact Us |
Conversion Charts |
Site Map
|
