Material Description:
SL Plastic (Support Table)
- UHMW-PE ESD safe polyethylene
- Good tensile and flexural strength, fatigue and creep resistance
- Low friction, good wear and abrasion resistance
- Non-sloughing, no particulate generation
- No moisture absorptions
- Good chemical resistance
- ESD safe, low surface resistivity (103 Ohm)
- "PD" Material Chemical Compatibility Chart
| MECHANICAL PROPERTIES |
| Tensile strength at yield +23° C |
21 MPa |
ASDM D638 |
| Tensile strength at break +23° C |
48 MPa |
ASDM D638 |
| Elongation at break |
350% |
ASDM D638 |
| Hardness Shore D |
62-66 |
ASDM D2240 |
| Izod-impact strength (notched) +23° C |
1600 J/m2 |
ASDM D 256 |
| Charpy-impact strength (unnotched) + 23° C |
20 kJ/m2 |
DIN 53453 |
| THERMAL PROPERTIES |
| Coef. of lin. therm expansion, normal: |
2.0E-4/°C |
ASDM D 696 |
| Continuous Use Temperature |
80° C |
20'000h |
| Short Time Temperature |
100° C | |
| ELECTRICAL PROPERTIES |
| Surface resistivity |
103Ohm |
IASTM D257 |
| OTHER PROPERTIES |
| Density |
0.93 g/ccm |
ISO 1183 |
| Color |
black | |
| Water absorption in water 23° C |
0.0% |
ISO 62 |
SD Plastic (Screwdriver Handle)
- PP/GF25 glass fibre reinforced polypropylene (carbon modified)
- Good tensile and flexural strength
- Smooth surface
- Good chemical resistance to acids, alkalis and organic solvents;
good hydrolytic resistance (hot water)
- ESD-safe material, low surface resistivity (105-106 Ohm)
- Low particle generation
ND Plastic (Screwdriver Rotating Cap)
|
