| TECHNICAL DATA SHEET:
Stainless Anti-Magnetic Tweezers Type - "SA" |
|
|
General Notes:
- Low Carbon Austenitic Steel (Material Number 1.4404, DIN X2CrNiMo17-12-2,
AISI Number 316L, Thyssen Steel)
- Contains From 16.5 to 18.5 wt% Chromium and has Important Quantities of Nickel and Molybdenum as Additional Alloying Elements
- Anti Magnetic
- Good Corrosion Resistance to Most Chemicals, Salts and Acids
- Generally Used Where Corrosion Resistance and Toughness are Primary Requirements
- Typical Applications Include Tools and Equipment for Laboratory and Medical Applications in Mild Aggressive Chemical Environments
- "SA" Material Chemical Compatibility Chart
|
|
COMPOSITION |
| Component |
Wt.% |
Component |
Wt.% |
Component |
Wt.% |
| C |
≤ 0.03 |
Si |
≤ 1.0 |
Mn |
≤ 2.0 |
| P |
≤ 0.045 |
S |
≤ 0.03 |
Cr |
16.5-18.5 |
| Mo |
2.0-2.5 |
Ni |
10.0-13.0 |
|
| |
|
| MECHANICAL PROPERTIES: |
| State | Annealed | |
| Density | 8.0 g/cm3 | |
| Hardness HB30 | ≤ 215 | |
| Hardness Rockwell B | 79 | |
| Tensile Strength, Ultimate | 500-700 MPa | |
| Tensile Strength, Yield | 290 | |
| 0.2% Yield Stress | ≥ 200MPa | |
| Elongation, Break | 40% | |
| Modulus of Elasticity | 200 GPa | |
| THERMAL PROPERTIES: |
| Coef. of Lin. Therm Expansion: | 16.0 E-6/°C | 20°C - 100°C |
| Coef. of Lin. Therm Expansion: | 17.0 E-6/°C | 20°C - 300°C |
| Specific Heat Capacity: | 0.50 J/(g.K) | |
| Thermal Conductivity: | 15 W/(m.K) | |
| Continuous Use Temperature: | 300°C | |
| Max Service Temperature, Air | 925°C | |
| ELECTRICAL PROPERTIES: |
| Resistivity | 0.75 E-4 Ohm.cm | | |
|
|
|
|
|
Phone: (520) 799-8000 | Email: sales@tdiinternational.com ©
Copyright 2000-2012 TDI International, Inc.
TDI Home |
Catalog |
Newsletter |
Terms |
Privacy Policy |
Contact Us |
Conversion Charts |
Site Map
|
