 |
 |
| SHELF RACKS Heavy-duty (2 required per compartment) |
SHELVES Heavy-duty stainless steel or 1/4" thick acrylic (3/8" thick available for extra heavy loads). |
|
|
 |
 |
| STAINLESS STEEL PLATES Provides full conductive grounding in ESD
cabinet applications & protects from acrylic
surface abrasion. |
GROUNDING
Grounding wire connects from hinge to hard ground in ESD cabinet applications. All racks, shelves, plates, latches & hinge connect to this common ground. |
|
|
 |
 |
| PLENUM CHAMBER Purges nitrogen into compartments at an even rate. Plenum chamber features a removable
back wall. (SD Acrylic Desiccators include an
SD acrylic back plenum wall.) |
BLEEDER VALVE Auto relieves excess nitrogen.
Ultra Nitro-Flow® compartment flow-thrus allow
for a single bleeder valve required for multiple compartment cabinet. |
| |
 |
 |
| FLOWMETER Allows control of nitrogen flow.
#002A Flowmeter - 1-10CFH
#002B Flowmeter - 2-20CFH &
#002C Flowmeter - 10-100CFH |
DRAWER SLIDES
Acrylic or Stainless Steel Drawers Shown with horizontal and vertical stainless steel dividers. |
| |
 |
HYGROMETER
Indicates cabinet temperature and relative humidity level. Mounted in acrylic ID Pocket. 1 per cabinet or 1 per door. Hygrometer is not required when #HM40 Humidity Control Monitor is utilized. |
|
| |
 |
 |
CAM LOCKS
Keyed alike or differently |
ID POCKET
Door mounted card holder |
| |
 |
 |
| STAND Heavy-duty with cross member supports for lifetime durability. Levelers or Casters available. |
LOCKABLE CASTERS
Recommended for large capacity desiccator cabinets for enhanced mobility. |