TDI PEEK Tweezer Tip Material Specifications

TECHNICAL DATA SHEET for CP Fiber Tip Tweezers:

General Notes:

PEEK/CF 30 Polyetheretherketone Reinforced with 30 wt% Carbon Fiber

Very Hard, Rigid, High tensile and Flexural Strength

Very High Wear Resistance

High Heat Capability (260°C - 300°C)

Good Dimension Stability

Low Thermal Linear Expansion Coefficient

Excellent Resistance to Chemicals and Aggressive Agents, Excellent Resistance to Thermal Ageing

ESD-Safe Material, Low Surface Resistivity (10² Ohm)
Typical Applications Include Handling of Components in Cleaning/Chemical/Assembly Processes also at High Temperature (Soldering)

MECHANICAL PROPERTIES:
Flexural Modulus +23°C:	21400 MPa	ISO 178 ASTM D 790
Flexural Strength +23°C:	350 MPa	ISO 178 ASTM D 790
Tensile Modulus +23°C:	24000 MPa	ISO 527 ASTM D 638
Tensile Strength +23°C:	190 MPa	ISO 527 ASTM D 638
Izod - Impact Strength (Notched) +23°C:	65 J/m	ISO 180/4A ASTM D 256
THERMAL PROPERTIES:
Temp. of defl. Under Load (1.80 MPa):	300°C	ISO 75 ASTM D648
Continuous Use Temperature:	260°C	20'000 h
Short Time Temperature:	300°C
ELECTRICAL PROPERTIES:
Surface Resistivity:	10² Ohm
Decay Time:	<0.1 sec	1000-10 V
OTHER PROPERTIES:
Density:	1.39 g/ccm	ISO 1183
Water Absorption in Water 23°C (21h)	0.01%	ISO 62