TDI Super Alloy Tweezer Material Specifications

TECHNICAL DATA SHEET for NC Super Alloy Tweezers:

General Notes:

Ni-Cr-Mo SuperAlloy
Excellent Strength From Room Temperature to 800°C
Six Times Harder Than Anti-Magnetic Stainless Steel
Resistant to Fatigue, Very High Shape Retention
Fully Non-Magnetic
Excellent Corrosion Resistance to Most Chemicals, Salts and Acids
Typical Applications Include Non-Magnetic Tools for the Electronics Industry and For Laboratory and Medical Applications in Aggressive Chemical Environments

MECHANICAL PROPERTIES:
State	50% Cold Reduction
Density	8.4 g/cm³
Hardness Rockwell C	60-64	Highest Hardness at Tweezers Tip
Tensile Strength, Ultimate:	1500 MPa
Tensile Strength, Yield	1250
Elongation, Break	5%
Modulus of Elasticity	208 GPa
THERMAL PROPERTIES:
Coef. of lin. therm expansion:	12.8 E-6/°C	25°C-100°C
Coef. of lin. therm expansion:	13.4 E-6/°C	25°C-300°C
Specific Heat Capacity:	0.41 J/(g-K)
Thermal Conductivity:	10 W/(m-K)
Continuous Use Temperature	600°C
Max Service Temperature, Air	980°C
ELECTRICAL PROPERTIES:
Resistivity	1.29E-4 Ohm.cm