Fiber Replaceable Tip Tweezers – Self Aligning Tip Replacement Procedure

 

(1) Us a small Phillips Screwdriver to remove screw holding tweezer tip to handle.

 

(2) Remove tweezer tips held by the dowel pins into handle.

(3) Replace with new tweezer tip- inserting tips by dowel pins into handle, re-insert screw.

Note: All tweezer tips are designed to align with second tip, fully interchangeable, no match required. One tip only can be replaced where new tweezers/tips require one tip change with full alignment (new tip with existing second tip).