Technical Data Sheet: High Tech Plastic Type “TD”®

General Notes:

Very hard, rigid, high tensile and flexural strength, creep resistance.
High heat capability (230-260°C)
Good dimension stability, low thermal linear expansion coefficient
Excellent chemical resistance (organic solvents, oils, grease, fuels, acids and alkalis)
Not resistant only to hydrochloric acid and oxidizing agents
Excellent resistance to thermal aging, very low moisture absorption
ESD Safe Static Dissipative Material
Microwave transparent
Typical applications include handling of EOS/ESD Sensitive Components and handling of components during thermal, chemical and soldering processes.

Mechanical Properties
Flexural Modulus +23°C	11700 MPa	ASTM D 790
Flexural Modulus +60°C	10500 MPa	ASTM D 790
Flexural Modulus +90°C	8500 MPa	ASTM D 790
Flexural Modulus +120°C	6000 MPa	ASTM D 790
Tensile Strength +23°C	132 MPa	ISO 527
Tensile Strength +60°C	118 MPa	ISO 527
Tensile Strength +90°C	115 MPa	ISO 527
Tensile Strength +120°C	95 MPa	ISO 527
Rockwell Hardness M	99	ASTM D 785
Izod – Impact Strength (Notched) +23°C	75 J/m	ASTM D 256
Charpy – Impact Strength (Unnotched) +23°C	16 kJ/m2	DIN 53453

Thermal Properties
Temp of defl. under load (1.80 MPa)	263°C	ASTM D648
Temp of defl. under load (0.45 MPa)	278°C	ASTM D648
Vicat softening temperature (50°C/h 50N)	244°C	ISO 3068
Coef. of lin. therm. expansion, normal	2.80E-5/°C	ASTM D 696
Constant Use Temperature	200°C	20’000 h
Short Time Temperature	230°C

Electrical Properties
Decay Time	<0.5 sec	1000-10V
Surface Resistivity	Low Resistance Limit: 10⁶ Ohm/high resistance limit: 10⁸ Ohm at 50 and 100V Low Resistance Limit: 10⁷ Ohm/high resistance limit: 10⁹ Ohm at 10V

Other Properties
Density	1.61 g/ccm	ISO 1183
Water Absorption in Water 23°C (24h)	0.01%	ISO 62